Planning Your Project
Construction
Our cabinets are all wood cabinets with solid wood door and face frame, sturdy 1/2″ plywood sides and bottoms.
Shelves are 5/8″ thick.
Wood
Effects of Moisture on Wood
Moisture naturally affects the expansion and contraction of wood. Wood is hygroscopic, that is it gains and loses water to match its environment. Armstrong uses kiln dried wood processed to 8 – 12% moisture content, which is an industry standard. The buy methenolone acetate at uk material is then finished and sealed. The process does not yield a hermetically sealed product; therefore, subjecting the product to different humidity conditions may lead to expansion or contraction of the product. Subjecting doors to humidity levels lower than 30% or higher than 60%, may affect each door differently.
We suggests an acclimatization period for your cabinets. The process consists only of living in your home under normal HVAC conditions for 30 to 60 days. This allows the elevated moisture from the new or remodeling construction process to normalize. Do not try to fix the doors until after the acclimatization period. If after 60 days under normal living conditions, your cabinetry does not properly settle, please contact your dealer, builder, or remodeler.
Warp is the bending or twisting of a part. To measure a door, lay the product on a flat surface and measure the gap from the surface to the part. The standard allowable tolerance for wood is 1/16” per lineal foot. Material that fall within specification are considered acceptable, as part of the natural characteristics of wood.
Finish Process
- .1All surfaces are machine and hand sanded
- .2All dust particles are mechanically removed
- .3Pre-Stains are applied evenly to provide base color uniformity
- .4Specially formulated stain is hand sprayed
- .5Surfaces are hand wiped or brushed with a soft china bristle brush.
- .6Stained products undergo a slow drying process
- .7Chemical resistant sealer is applied
- .8Sealed products are baked to ensure a complete cure throughout
- .9Sealed surfaces are hand sanded with ultra fine sandpaper
- .10Products are quality inspected for cleanliness and smoothness
- .11Catalyzed Varnish is applied
- .12Varnished products are pre-cured
- .13Products are then placed into high velocity ovens
- .14Surfaces are once again sanded with ultra fine grit sandpaper
- .15Final sanding dust is removed
- .16Second coat of Catalyzed Varnish is applied
- .17Final topcoat is pre-cured, followed by a slow bake
Installation
Types of Cabinets:
- Base Cabinets
- BBC Offset
- Lazy Susan Base Cabinets and DBC3612
- Wall Cabinets
- WDC